Speed up internet , even gprs and utorrent

Links 🙂
source @ http://www.thinkdigit.com/forum/showthread.php?t=90610
MAYBE THIS WOULD BE USEFULL for you.SO PLZ FOLLOW THE FOLLOWING INSTRUCTIONS CAREFULLY TO GET BETTER SPEED VIA µTORRENT…
STEPS:-
1.FIRST OFALL GOTO THE FOLLOWING LINK AND DOWNLOAD THE FILE NAMED “EvID4226Patch223d-en” WHICH IS ONLY 40KB IN SIZE.
http://www.lvllord.de/?lang=en&url=downloads#4226patch
2.THE FILE U DOWNLOADED IS A ZIP FILE SO PLZ UNZIP THROUGH ANY SOFTWARES SUCH AS WINRAR,WINZIP,
7-zip,IZArc ETC.
3.WHEN U UNZIP U WILL GET A FILE NAMED “EvID4226Patch”.
4.DOUBLE CLICK ON IT AND IT WILL ASKED TO CHANGE THE VALUE FROM 10 TO 50.PRESS Y TO PROCEED.WHEN IT ASKED FOR WINDOW CD JUST CANCEL IT AND PRESS NO.
5.AFTER CHANGING THE VALUE TO 50.RESTART YOUR PC.
6.GOTO WEBSITE utorrent.com and download the latest version of µTORRENT.
7.INSTALL IT.
8.AFTER INSTALLATION GOTO OPTIONS-PREFERENCES AND SET THE VALUES AND OPTIONS as:
a.IN CONNECTION THE PORT USED FOR INCOMING CONNECTION IS BETWEEN 50000 AND 60000.
b.UPnp PORT MAPPING SHOULD BE UNCHECKED.

c.MAXIMUM UPLOAD RATE IS 30 AND DOWNLOAD RATE MAY BE EITHER 0 OR 375 OR 500 etc.
d.IN ADVANCED OPTION net.max_halfopen VALUE SHOULD BE SET TO 50.

^^ 100 is a better value…use 1000 though

for dataone 2 mbps, global max upload = 10, download = 0.
for dataone 256 kbps, max upload = 5, download = 0

Advertisements

11 thoughts on “Speed up internet , even gprs and utorrent

  1. 8.AFTER INSTALLATION GOTO OPTIONS-PREFERENCES AND SET THE VALUES AND OPTIONS as:
    a.IN CONNECTION THE PORT USED FOR INCOMING CONNECTION IS BETWEEN 50000 AND 60000.
    b.UPnp PORT MAPPING SHOULD BE UNCHECKED.
    c.MAXIMUM UPLOAD RATE IS 30 AND DOWNLOAD RATE MAY BE EITHER 0OR 375 OR 500 etc.
    d.IN ADVANCED OPTION net.max_halfopen VALUE SHOULD BE SET TO 50.

    ^^ 100 is a better value… use 1000 though for dataone 2mbps, global max upload = 10, download = 0.
    for dataone 256 kbps, max upload = 5, download = 0
    tested for maximum speeds.

  2. Broadband speed from ur dial up/GPRS modem..!

    Features

    * built in dns accelerator technology
    * avoid disconnections from ur isp
    * Increases average internet speed by 2 – 3x faster..!!
    * can b used with cable / dsl/ or GPRS users specially..!!
    * connection speed measurment

    HOW TO USE IT……….

    1) Install tweakmaster pro

    2) den copy & paste the blue coloured patch file to program folder usually C/PROGRAM FILES/ TWEAKMASTER PRO

    3) Now run it by double clicking. dont press anywhere.

    4) Now close all other open windows including program folder

    5) den only click on patch.. it ll say patching done successfully.

    Using Tweakmaster to speed up ur connection to MAX..!!

    1) Open it by double clicking tweakmaster

    2) click connection optimiser

    3) click next.

    4) select ur connection type

    5) if u use gprs den select “wireless connection”

    6) select 1st stratagy , den click next n lastly apply. ur pc will reboot.

    7) now feel the difference. if dont see much improvement den again follow these steps n select next stratagy.

    Glasses follow this untill u get max speed.

    9) Now again open tweakmaster. select DNS ACCELERATOR.

    10) Enable both options. set update daily. In Host list add the names of all those sites u access daily like “www.orkut.com” or “www.login.yahoo.com”

    11) open link fox. similarly add names of all those sites u access frequenly.

    Download 2.5MB
    http://rapidshare.com/files/120694860/TweakMaster-Pro_by_baula.rar

  3. 56K Tweaks
    Posted 9/6/2003 by TweakXP Member
    One of the most frustrating things to have with a computer is a slow internet connection and 56K is about as slow as it gets these days. I feel the pain that 56K users have and hope that by following this thread they can experience a faster more reliable internet connection. There are a few things that one must understand prior to tweaking their 56K connections. The first is that it is actually a 53.3K connection since that is the speed that the FCC limits you to, on top of that most dialup users actually connect in the 40,000 – 50,000K range, which is excellent by dialup standards. Being that you actually connect in the 40-50K range you need to understand that your maximum throughput is only going to be around 6 kilobytes per second.

    MOST OF THESE TWEAKS WILL NOT WORK WITH AOHELL, AOHELL USERS READ HERE.

    • First and most important is for you to download the latest drivers for your modem from the manufacturer’s website.

    • Make sure you have a “clean” phone line, no static on your line. If you have static you will have a very low connect speed and no tweak will fix that.

    • You need to download CableNut from here, it is the most comprehensive internet connection tweaking app available.

    Setting your TCP/IP and AFD registry parameters for optimum performance.

    Use the following settings in CableNut:

    DefaultReceiveWindow = 8192
    DefaultSendWindow = 4096
    DisableAddressSharing = 1
    InitialLargeBufferCount = 20
    InitialMediumBufferCount = 48
    InitialSmallBufferCount = 64
    LargeBufferSize = 40960
    MaxFastTransmit = 6400
    MediumBufferSize = 15040
    PriorityBoost = 0
    SmallBufferSize = 1280
    TransmitWorker = 32
    FastSendDatagramThreshold = 1024
    EnableFastRouteLookup = 1
    EnablePMTUDiscovery = 1
    IgnorePushBitOnReceives = 0
    GlobalMaxTcpWindowSize = 8760
    MaxFreeTcbs = 4000
    MaxHashTableSize = 8192
    MaxNormLookupMemory = 1500000
    SackOpts = 1
    SynAttackProtect = 1
    Tcp1323Opts = 0
    TcpLogLevel = 1
    MaxDupAcks = 3
    TcpMaxHalfOpen = 100
    TcpMaxHalfOpenRetried = 80
    TcpRecvSegmentSize = 1460
    TcpSendSegmentSize = 1460
    TcpTimedWaitDelay = 30
    TcpUseRFC1122UrgentPointer = 0
    TcpWindowSize = 8760
    MaxConnectionsPer1_0Server = 8
    MaxConnectionsPerServer = 4
    DefaultTTL = 128
    DisableUserTOSSetting = 0
    TcpMaxDataRetransmissions = 6
    DefaultTOSValue = 90

    Other important tweaks to improve your connection.

    Open your control panel and select the phone and modem properties icon – select the modems tab, under the modems tab highlight your modem and select properties

    • General tab:

    Set your speaker volume to your preference
    Maximum port speed – 115,200

    • Advanced tab:

    • Extra Settings – this is where you put in initialization strings, they can help stabilize your connection. Try the following websites for init strings for your modem.

    Spy.net
    56K.com
    West.net
    ModemHelp.org

    • Advanced port settings – check “use FIFO buffers” then slide both bars to the far right.
    • Change default preferences:
    Port Speed – 115,200
    Data Protocol – Standard EC
    Compression – enabled
    Flow Control – hardware

    • Advanced:

    Data bits – 8
    Parity – None
    Stop Bits – 1
    Modulation – Standard

    Now select the Network and Dialup Connections and right click on your ISP’s icon and select properties.

    • General tab:

    Highlight your modem and select “configure”, set the maximum speed to 921,600 and under “hardware features” all the boxes are checked.

    • Networking tab:

    Uninstall all the protocols you don’t need. If this is a stand alone pc then all you need is Internet Protocol TCP/IP.

    Select the settings button and make sure all the boxes are checked.

    Setting your COM port speed properly:

    Right click on My Computer and select properties – hardware – device manager – select your COM port – port settings tab – bits per second 128000 (you may need to set this a few times to make it stick).

    Other important registry tweaks:

    • Speeding up network browsing.

    Open regedit and navigate to:

    HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Explorer/RemoteComputer/NameSpace

    Delete the key: {D6277990-4C6A-11CF-8D87-00AA0060F5BF}

    • Faster webpage tweak by giving priority to DNS lookup.

    Copy and paste the following and make it a .reg file and merge it into your regstry:

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\ServiceProvider]

    “DnsPriority”=dword:00000001
    “HostsPriority”=dword:00000001
    “LocalPriority”=dword:00000001
    “NetbtPriority”=dword:00000001

    • Forward buffer memory tweak, this controls how much RAM TCP/IP uses for storing packet data in the router packet queue.

    Copy and paste the following and make it a .reg file and merge it into your regstry:

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]

    “ForwardBufferMemory”=dword:00024a00
    “NumForwardPackets”=dword:0000024a
    “MaxForwardBufferMemory”=dword:00024a00
    “MaxNumForwardPackets”=dword:0000024a

    • By default Windows 2K & XP cache everything in the DNS cache service, both correct and faulty DNS lookups. To increase performance by eliminating the caching of faulty DNS lookups, copy and paste the following and make it a .reg file and merge it into your regstry:

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters]

    “NegativeCacheTime”=dword:00000000
    “NetFailureCacheTime”=dword:00000000
    “NegativeSOACacheTime”=dword:00000000

    Internet Explorer important settings:

    Open Internet Explorer and select Tools – Internet Options – under the General tab in the Temporary Internet files section select the Settings button.

    Select “Every visit to the page” and set the amount of disk space to use: to no more than 80MB. Now select the Connections tab and select LAN Settings make sure EVERYTHING there is unchecked and select OK.

    Select the Privacy tab and choose Advanced check the box “Override automatic cookie handling” and for First-party Cookies – Accept, Third-party Cookies – Block and check “Always allow session cookies. Now NO MORE SPYWARE COOKIES.

    Open Internet Options and under temp internet files – settings select – every visit to page.

    If you have a dial up connection I HIGHLY recommend using a download manager, it will help maximize your download speed, resume downloads if you are disconnected and you can even schedule downloads for the middle of the night (it will automatically dial up and download the desired file and hang up when done) when you aren’t using your pc.

    source : http://www.tweakxp.com/article37123.aspx

  4. hi buddy
    myself subodh i m using aircel n access gprs on laptop,i
    tried each n every trick or tips provided by u.
    but still i have xperienced same pbm.
    juz it shows fake values about increasing speed but real itz da only f***ing.

    plz give some real tricks dat works.

  5. i think it’s working on me.. i am using airtel ..thank you to those who have create this method to speed up gprs and thanks to you too who have share this information in internet and for free… and i request you guys please keep sharing your idea free on internet it will help us beinger… THANK YOU…

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s