Category Archives: Tutorials

This section offers tutorials and How to’s on just about anything related to computers and IT

Two Sided Printing in WPS

SOURCE: How to do Two Sided Printing on a Single Sided Printer

‘Manual Duplex’ Printers

Some single sided printers are advertised as doing double
sided printing by ‘manual duplex’. It is essentially the same as the
method described above in this article but separating out of the odd
& even pages is built into the printer or printer driver for
convenience. If your printer has it then it is probably easier to use
it because it won’t need you to find a program capable of odd/even
division of printing, should automatically add a blank terminal even
page if needed and the way to arrange the paper to feed back in should
be specified in the instructions or on the printer itself.

Pinting in Ubuntu with HP Printers

installing HPLIP

sudo apt-get install hplip-gui

source:

HP Linux Imaging and Printing

HP Linux Imaging and Printing

Print, Scan and Fax Drivers for Linux

HP Linux Imaging and Printing

Installer Walkthrough

Note: If your python version is 2.5 or less, click here for more information about the tar package options. Otherwise continue with the below instructions.

Step 1: Download the Automatic Installer (.run file)

Download HPLIP 3.15.7:

(Download Digital Certificate) What’s this?

Step 2: Run the Automatic Installer

Running the installer requires that you open a command shell to enter commands. To do this, open a terminal or console window (how do I open a terminal?).

In the terminal/console, enter the following commands (type all the text after the $ character and then press enter):

Note

These instructions assume that the hplip-3.15.7.run file was downloaded to your Desktop directory. You may have to adjust the ‘cd’ command based on where your web browser saved the file on your system.

Step 3: Select the Install Type

Select the install mode: Automatic (enter an ‘a’) or Custom (enter a ‘c’). We recommended that most users select the Automatic install mode (what settings does automatic install mode use?)

Step 4: Verify your Linux Distribution

Note

Ensure the installer detected the correct Linux distribution. Different Linux versions use different install procedures if the incorrect version is selected, the installer may fail.

Step 5: Enter Your root/Superuser User Password

Step 6: Read the Installation Notes

Depending on your Linux distribution some steps may need to be completed before going further with the HPLIP install. Please follow any directions given.

Step 7: Detect Any Missing Dependencies

The installer will now detect what dependencies your system will need to install before installing HPLIP. In addition any package manager clean up steps will be ran. These are executed to try and minimze any potential package manager problems.

Step 8: Download and Install Any Missing Dependencies

If your system is missing any dependencies they are now downloaded and installed.

Step 9: ‘./configure’ and ‘make’ will run

./configure prepares HPLIP for install as well as your system is verified to have all the required dependencies for HPLIP.

‘make’ is then executed. Make compiles (“builds”) HPLIP for your system.

Step 10: ‘make install’ is Run

‘make install’ is the actual install procedure, this step is where HPLIP is actually being installed to your system.

Using ‘hp-setup’ to configure your printer

This guide will walk you through configuring your printer using ‘hp-setup’.

Step 11: Select How Your Printer will be Connected to Your Computer

The first step is to select the printer connection type:

screenshots_sm_hp_setup_step1

Step 12: Select the Printer to be Configured

Next the setup tool will display printers detected (depending on the connection type selected):

screenshots_sm_hp_setup_step2

Step 13: Select the PPD file (or driver) to be Used for Your Printer

The PPD files (drivers) which are most similar to your printer are displayed. Select the appropriate PPD file for your printer.

Note

Usually you will want to select the recommended PPD file.

screenshots_sm_hp_setup_step3

Step 14: Confirm the Printer Settings and Finish the Configuration Process

Click “AddPrinter” to complete the printer setup process:

Other Sources:

1. DebuggingPrintingProblems – Ubuntu Wiki

For HP printers also use

$ hp-info -i

and choose the printer with the problem from the text menu, then copy the “deviceid” entry from the output (can be several lines).

2. Problem with printing (hplip) in Ubuntu 14.04 – Ask Ubuntu

Run hp-setup, then if the problem still persists follow these steps, too:

  1. Go to http://localhost:631/, then go to “Printers”, there your printer will be listed under queue name, click it.

  2. Click “Administration” drop down menu

  3. Select “set allowed users”

  4. Type in your computer “username” and “select allow these users to print” and click “Set allowed Users”.

3. Problem with printing (hplip) in Ubuntu 14.04 – Ask Ubuntu

run sudo apt-get install hplip-dbg hplip-gui before running hp-setup

4. HP Linux Imaging and Printing download | SourceForge.net

The Hewlett-Packard Linux Imaging and Printing Project provides a unified single and multi-function connectivity solution for Linux. For support and help, please visit https://launchpad.net/hplip

Appearance Menus Screen for WordPress

source: Appearance Menus Screen « WordPress Codex

Appearance → Menus

The Appearance Menus Screen enables a user to create custom navigation menu in place of a theme’s default menu. Support for this feature must be registered in the theme’s functions.php file. The WordPress Menu User Guide describes the details of adding, deleting, and maintaining menus.

Appearance Menus Screen

source 2 :Pioneer Web Design

WordPress › Support » how to add category link to navigation bar?

Login to Admin Dashboard>Appearance>Menus>Screen Options (upper right)>Make sure ‘Categories’ is checked>Add a Menu>Name it>Drag categories one at a time to it>arrange as desired>save>>>Theme Locations>Chose theme provide location>>>View site>>>Continue as desired editing your custom menu by adding pages, posts, tags, external links>You can even create styles and apply them.

Please take time to read the documentation provided at the link above and the links it’s contains.

Link Categories in WordPress

Source : Links Manager « WordPress Codex

WordPress code logo thumbnail

Link Categories

Link category screen.

Links in WordPress can be organized into categories, all the better for organization. The default installation of WordPress automatically sets one category, Blogroll. You are given the ability to add, edit and delete categories.

also see:

1. Blogging with WordPress

2. How to Link to Posts, Pages, Categories, Tags, Authors, and Feeds in WordPress | Learning from Lorelle

3. 55+ Most Wanted WordPress Tips, Tricks, and Hacks

4. Create Your Own WordPress Theme from an HTML Template

5. FAQ Layout and Design « WordPress Codex

Embedding Feedly Categories in WordPress

 

Embeddable Feedly Mixes | Open feedly

HTML code for embedding a feedly widget to a web page:

<iframe scrolling="no" height="900" frameborder="no" align="center" width="990"
   name="feedlyWidget" marginwidth="0" marginheight="0"
   src="{{{replace with your mix URL}}}" noresize="true"
   noborder="true">

Adding the Ning Widget to your Ning Social Network:

1. visit your Ning Network "Add an Application Page":
   http://{{{your ning network}}}.ning.com/opensocial/ningapps/addByUrl
2. enter Ning App URL
   http://www.feedly.com/mix/{{{user id}}}/{{{category}}}
3. click on "Add Ning App"

Note: part of the process of publishing a widget is to make the associated category public in feedly and Google Reader.